It’s the procedure of repairing a residence or property to its pre loss condition. Injury to the property could be as a result of an overflow, flood or any other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the procedure and completion of the process. You can find two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage because of water guide could be the benchmark tool that’s utilized by companies that specialize in restoration of water damage.
sewage cleanup Des Moines, IA

Loss Assessment and Categorization

Loss evaluation is the initial and the most important part of water damage restoration. The assessment must be correct so an appropriate response could be taken. In restorating the damage caused by water, technicians and the insurance companies must come together and know what is damaged and how exactly to go about restoring the damage. Identifying the origin of the damage, documentation of damage, and accurate estimates are mandatory for a proper water damage restoration. Categorization is based on the contamination levels of the water source. The categories are listed below

Category 1 – This really is water from clean sources like pipes, sinks and toilets without faeces or urine.

Category 2 – This really is water that’s some contaminants like water from a dishwasher, washing machine or toilet with urine.

Category 3 – This really is water that’s highly unsanitary and is capable of causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.

Decontamination and Drying

After the evaluation is complete, the procedure of drying and decontaminating begins at the site. Based on the extent of damage, damage caused because of water could be classified into 4 types. Class 1 Damage- When loss is fixed to a small area and less water has been absorbed by materials. This results in slow evaporation rate. Class 2 Damage – Once the damage is always to the entire room and carpet area. Class 3 Damage – When the entire area is saturated with water and Class 4 Damage – when there are numerous deep saturation pockets. Decontamination and drying is a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments need to be used. Decontamination must be performed if contamination has been detected in the area. Decontamination may be performed for your area or in specific pockets where contamination has been detected.

Leave a Reply

Your email address will not be published. Required fields are marked *